SPCC steel is produced by subjecting hot rolled steel to a cold rolling process. This involves passing the steel through the warehouse under queues, which not only improves its surface finish but also enhances its mechanical properties.

API Spec 5L is an international standard that specifies the manufacturing requirements for two product specification grades (PSL 1 and PSL 2) of seamless and welded steel pipes used in pipeline transportation systems in the oil and gas industry.

Thickness 0.16~2.0 mm Width 750mm~1250 mm
Coil ID 508mm/610mm
Coating AZ30-AZ150g/m2
Coil Weight 3-5mt
Surface Anti-fingerprints(AFP)/ GL

Galvanized steel pipe, also known as galvanized pipe, is divided into two kinds of hot-dip galvanized pipe and Electro galvanized pipe. The hot-dip galvanized layer is thick, the coating is uniform, the adhesion is strong, and the service life is long.

A53 American standard seamless steel pipe is made of high-quality steel billets through hot rolling, cold drawing and other processes. The chemical composition and mechanical properties of this steel pipe comply with the requirements of American standard ASTM A53/A53M.

Manganese Plate is the ideal solution for cases where severe wear is combined with shocks or high pressure capable of work-hardened its austenitic structure. Used in jaws of crushers, hammers or pulverizers, cutting edges of large excavators, liners of shotblasting units, cores and wall of parpen moulds, and screens.

Color coated steel plate is in the continuous unit to cold rolled strip steel, galvanized strip steel (electric galvanized and hot galvanized) as the substrate, after surface pretreatment (degreasing and chemical treatment), with the roller coating method, coated with a layer or multiple layers of liquid paint, after baking and cooling of the plate.

The spiral submerged arc welded pipe is made of hot-rolled steel strip through constant temperature spiral forming and automatic submerged arc welding. The manufacturing process is to roll the steel strip, make the rolling direction at a certain angle to the center direction of the tube, and then form and weld, so the weld is spiral.

Galvanizing is a zinc coating applied to sheets of steel through a process called “continuous hot-dip,” in which steel sheet passes through a bath of molten zinc. The liquid zinc bonds to the iron in the steel forming a protective layer on both sides of the sheet.